A gym client may want to track back strength more objectively. A field sport athlete may need trunk and posterior-chain strength monitoring as part of a broader programme. A client returning to loaded back training may need a simple way to monitor strength progress across training blocks.
The Back Repetition Maximum Test provides a controlled way to assess loaded back-strength performance using a standardised back machine, trunk extension machine, cable setup or other clearly defined back-strength exercise. Rather than requiring a true 1RM attempt, the test can be performed using a submaximal repetition maximum, such as a 3RM, 5RM, 8RM or 10RM. The load and reps are then entered into Measurz to calculate the estimated 1RM.
The result is useful for strength tracking, but it should not be interpreted as a complete measure of spinal health, back pain, trunk control, lifting capacity, injury risk or sport readiness.
The Back Repetition Maximum Test measures the heaviest load a client can complete for a defined number of repetitions using a standardised back-strength movement.
Depending on the protocol, this may be a 3RM, 5RM, 8RM, 10RM or another repetition maximum. The repetition target should be clearly recorded.
The test may be performed using:
Back extension machine
Trunk extension machine
Selectorised back machine
Cable back-extension setup
Loaded trunk-extension setup
Other standardised back-strength setup
In Measurz, the professional records the load and completed repetitions. Measurz then calculates the estimated 1RM from that result. This estimated 1RM can be used to monitor progress over time and guide loading decisions.
If the client performs a true single-repetition maximum, the result should be labelled as a directly measured 1RM. If the result is calculated from a submaximal load and repetitions, it should be labelled as an estimated 1RM.
This test is used to assess loaded back-strength performance and track strength changes over time.
It may be useful for gym clients, athletes, general fitness clients and strength programmes where trunk, back or posterior-chain loading is a meaningful monitoring variable.
It is especially useful when the professional wants a strength estimate without requiring a true maximal 1RM attempt. A submaximal RM test can be more practical for many clients while still giving a useful estimated 1RM through Measurz.
The test measures back-strength performance under the selected setup.
It may reflect:
Loaded trunk-extension strength
Machine-based back strength
Posterior-chain strength contribution
Load tolerance
Control through the selected ROM
Pain or symptom response
Estimated 1RM progress across training blocks
Training load progression
It does not measure spinal health, back pain cause, isolated erector spinae strength, lifting technique, trunk endurance, whole-body strength, work capacity, injury risk or sport readiness on its own.
This test may be useful for gym clients, athletes, general fitness clients, lower-limb strength clients and people completing trunk, back or posterior-chain training.
It may not be appropriate when loaded trunk movement causes unacceptable pain, the client cannot maintain a repeatable setup, the test cannot be performed through a consistent ROM, symptoms increase during loaded back movement, or the client is not ready for maximal or near-maximal repetition testing.
Back extension machine, trunk extension machine, cable setup or other standardised back-strength setup
Load stack, plates or selected external load depending on setup
Measurz for recording load, reps and estimated 1RM
Optional metronome
Optional video
Optional ROM marker or seat-setting note
Choose the back-strength setup
Decide whether the test will use a back extension machine, trunk extension machine, selectorised machine, cable setup or another clearly defined back-strength exercise.
Record the setup
Record machine type, seat position, pad position, hip position, foot position, ROM, tempo, load method and whether the movement is primarily trunk extension, hip extension or a combined movement.
Choose the repetition target
Select the repetition maximum target, such as 3RM, 5RM, 8RM or 10RM. Use the same target for retesting where possible.
Define valid ROM
Set a clear start and finish range. A valid repetition should use the same ROM each time without bouncing, excessive momentum, uncontrolled spinal movement or shortened range.
Warm up
Complete light warm-up sets. Increase load gradually before testing.
Perform the test
Ask the client to complete the selected repetition maximum with controlled movement and the defined ROM.
Stop the attempt
Stop when the client reaches the target reps, cannot complete another valid rep, loses ROM, uses unacceptable compensation, reports limiting symptoms or cannot maintain control.
Record the maximum successful set
The score is the heaviest load completed for the target repetition range with acceptable technique and ROM.
Enter load and reps into Measurz
Record the completed load and repetitions in Measurz. Measurz calculates the estimated 1RM from the entered result.
Record the load, reps and exact back-strength setup. Measurz uses the completed load and reps to calculate the estimated 1RM.
The estimated 1RM should be interpreted as an estimate, not the same as a directly tested 1RM. If a true 1RM was performed, label it as directly measured. If the result comes from a submaximal load and repetitions, label it as estimated.
Interpretation should include:
Absolute load
Completed repetitions
Estimated 1RM
ROM
Machine setup
Tempo
RPE
Pain or symptoms
Compensations
Previous baseline
A lower estimated 1RM may suggest reduced back-strength performance under the tested setup, but it does not identify the cause. Pain, fatigue, machine setup, hip position, spinal position, fear, confidence, recent training and technique may all influence the result.
No universal normative value should be applied across back-strength machines, protocols and populations. Back-strength results vary by machine design, pad position, hip position, ROM, trunk angle, movement type, training history and whether the 1RM is directly measured or estimated.
Use baseline comparison and progress across sessions as the primary benchmarks.
If a protocol uses a specific machine or standardised back-extension setup, only compare results with future tests using the same setup. Results from different machines or back exercises should not be treated as interchangeable.
Common errors include changing seat settings, changing pad position, using inconsistent ROM, bouncing, using momentum, overextending at the top, rounding excessively at the bottom, changing tempo, testing while fatigued, not recording symptoms and comparing results across different machines or movement styles.
A common recording error is failing to distinguish between a directly measured 1RM and an estimated 1RM. When load and reps are entered into Measurz, the result should be described as an estimated 1RM unless a true 1RM was directly tested.
The main limitation is that the test measures loaded back-strength performance only. It does not assess spinal health, diagnose back pain, measure work capacity, confirm injury risk or fully represent lifting performance.
Use this test to monitor back-strength performance, guide training loads and track response to trunk or posterior-chain strengthening programmes.
The estimated 1RM can help track progress across training blocks, adjust loading and compare results across retests when the same setup is repeated.
It is most useful when interpreted alongside movement quality, symptoms, hip strength, trunk endurance, lower-limb strength and relevant functional or performance tasks.
Record protocol type, equipment used, machine settings, pad position, hip position, foot position, ROM, tempo, load, reps, RM target, estimated 1RM, RPE, pain score, symptom location, compensation notes, reason for stopping and retest date.
Useful notes include shortened ROM, momentum, excessive spinal movement, hip movement, pain-limited stop, tempo failure, fatigue-limited attempt, confidence limitation or setup change.
The key Measurz workflow is:
Enter the completed load
Enter the completed reps
Review the estimated 1RM calculated by Measurz
Record setup, ROM, symptoms, RPE and compensations
Use the same protocol for retesting
It measures loaded back-strength performance under the selected setup.
The professional enters the completed load and reps into Measurz. Measurz uses this information to calculate the estimated 1RM.
Not unless the client completed a true 1RM. If the result is based on load and multiple repetitions, it should be labelled as an estimated 1RM.
No. It measures loaded back-strength performance. It does not diagnose the cause of back pain.
Only cautiously. Machine design, pad position, ROM and movement style can change the score.
Yes. Pain score, symptom location, ROM and whether symptoms limited the result should be recorded.
No. A 3RM, 5RM, 8RM or 10RM may be more appropriate for many clients. Measurz can use load and reps to estimate 1RM.
The Back Repetition Maximum Test measures loaded back-strength performance.
Measurz calculates the estimated 1RM from the recorded load and reps.
Setup, machine settings and ROM must be repeated for meaningful retesting.
Do not treat an estimated 1RM as the same as a directly measured 1RM.
Do not use the result to diagnose back pain or determine readiness on its own.
Record load, reps, setup, ROM, symptoms and RPE in Measurz.
Grgic, J., Lazinica, B., Schoenfeld, B. J., & Pedisic, Z. (2020). Test–retest reliability of the one-repetition maximum strength assessment: A systematic review. Sports Medicine - Open, 6, 31. https://doi.org/10.1186/s40798-020-00260-z
Herren, K., et al. (2017). Loading conditions in the spine, hip and knee during different executions of back extension exercises. BMC Sports Science, Medicine and Rehabilitation, 9, 10. https://doi.org/10.1186/s13102-017-0074-0
Suchomel, T. J., Nimphius, S., Bellon, C. R., & Stone, M. H. (2018). The importance of muscular strength: Training considerations. Sports Medicine, 48(4), 765–785.
