---
title: "Supine Hip Internal Rotation Test"
description: "Supine hip internal rotation testing requires clear 90-degree hip setup, tibial device alignment, transverse-plane recording, active/passive ROM and interpretation."
url: https://help.matassessment.com/en/articles/176-supine-hip-internal-rotation-test
collection: "Range of Motion (AROM/PROM)"
updated: 2026-05-21
language: en
---

# Supine Hip Internal Rotation Test

Supine hip internal rotation testing requires clear 90-degree hip setup, tibial device alignment, transverse-plane recording, active/passive ROM and interpretation.

The Supine Hip Internal Rotation Test measures how far the hip rotates inward while the client lies on their back. It can be measured actively or passively with the hip and knee flexed to a standard position. The result helps compare sides and add context to hip mobility, squatting, gait, running, cutting and lower-limb movement assessments.

## Introduction

A client may show one hip rotating differently during a squat, cutting drill or running assessment. Another client may feel stiffness, pinching or asymmetry when the hip rotates inward. Supine hip internal rotation testing helps quantify this movement.

Hip rotation is influenced by body position, femoral structure, pelvic control, symptoms and measurement method. The result should be interpreted as a movement measurement, not a diagnosis.

## Quick Summary

Test name: Supine Hip Internal Rotation Test  
Purpose: Measure hip internal rotation ROM in supine  
Movement: Hip rotates inward  
Joint/body region: Hip  
Plane: Transverse plane  
ROM type: Active ROM, passive ROM or both  
Score: Degrees of hip internal rotation  
Equipment: Goniometer, inclinometer or Measurz ROM workflow  
Best used with: Supine hip external rotation, prone hip rotation, FADIR, squat, gait, running and hip strength testing  
Key limitation: Pelvic rotation and inconsistent hip flexion angle can affect results

## What Is the Supine Hip Internal Rotation Test?

The Supine Hip Internal Rotation Test measures inward hip rotation with the client lying on their back. It is commonly performed with the hip and knee flexed to around 90 degrees, although exact positioning should be recorded.

## Why It Is Used

The test is used to quantify hip rotation, compare sides and monitor change.

It may help inform:

Hip mobility programming  
Squat and hinge assessment  
Running and gait analysis  
Cutting and change-of-direction assessment  
Side-to-side comparison  
Progress tracking across sessions

## What It Measures

The test measures hip internal rotation ROM in degrees.

It may be influenced by:

Hip joint motion  
Pelvic position  
Femoral version  
Soft tissue tolerance  
Pain or symptoms  
Hip flexion angle  
Measurement method  
Professional stabilisation  
Client relaxation

The result does not explain the cause of movement difference on its own.

## Active vs Passive Range of Motion

Active hip internal rotation measures how far the client can rotate the hip inward using their own control.

Passive hip internal rotation measures available movement when the professional guides the limb.

Active and passive values should be labelled separately.

## Who It Is Useful For

This test may be useful for runners, lifters, field sport athletes, dancers, gym clients and anyone where hip rotation affects movement or training goals.

## Equipment Required

Treatment table or mat  
Goniometer or inclinometer  
Pain scale  
Measurz for recording ROM  
Optional towel roll  
Optional comparison side notes

## Step-by-Step Protocol or How to Apply This in Practice

### Starting position

Position the client supine.

### Client position

Flex the tested hip and knee to the selected angle, commonly around 90 degrees.

### Professional position

Stand beside the tested hip and lower leg.

### Body/joint setup

Keep the pelvis level and stable.

### Stabilisation

Stabilise the pelvis and femur to reduce pelvic rotation or hip abduction/adduction compensation.

### Movement instruction

For active ROM, ask the client to rotate the hip inward while keeping the pelvis still.

For passive ROM, gently guide the hip into internal rotation until the first firm endpoint, symptom limit or compensation threshold.

### Measurement landmarks

For goniometry, align the axis along the knee or tibial reference depending on the selected method. Use the same landmarks each time.

### Inclinometer or device placement

Place the inclinometer consistently on the tibia or selected segment and record placement.

### What to ask

Ask about anterior hip pinching, groin symptoms, posterior hip stretch, stiffness, pain and whether symptoms are familiar.

### Stopping rules

Stop if pain increases, pelvic compensation dominates, symptoms are not tolerated or the client guards.

### What to record

Record active/passive method, side, degrees, pain score, symptom location, hip flexion angle, device used and compensation.

### Number of trials

One to three trials may be used. Record best, average or selected trial consistently.

### Retest consistency

Use the same hip angle, knee angle, pelvis control, device placement and endpoint each session.

## Scoring and Interpretation

The score is recorded in degrees.

A higher value means more internal rotation under the tested setup. A lower value means less internal rotation compared with the other side, baseline or selected reference value.

Interpretation is stronger when paired with pain, symptoms, external rotation, prone rotation, FADIR, gait, squat, running and hip strength findings.

Do not treat a hip rotation value as a diagnosis. Hip rotation may be influenced by anatomy, symptoms, control, testing position and measurement method.

## Normative Data, Benchmarks or Reference Values

Evidence level: **Level 2–3 — common values exist, but hip rotation varies widely.**

Common teaching references often describe hip internal rotation around **35–45 degrees**, depending on testing position and method.

Practical benchmarks:

Compare both sides  
Track baseline to retest  
Compare internal and external rotation  
Record pain and symptoms  
Record pelvic compensation  
Use the same supine setup each session

## Reliability and Validity

A 2020 hip ROM reliability study found excellent reliability for several hip measures among experienced examiners and also showed pelvic position can meaningfully affect hip ROM values.

A 2022 study reported reliability and validity for smartphone-based lower-limb ROM measurements, supporting digital methods when the protocol is standardised.

## Common Errors and Testing Limitations

Common errors include changing hip flexion angle, allowing pelvic rotation, forcing passive range, not recording symptoms, poor device placement, unclear active/passive labelling and comparing supine and prone values as identical.

Limitations include anatomy, femoral version, symptoms, guarding, measurement variation and position-specific results.

## Practical Applications

Use supine hip internal rotation ROM to track movement, compare sides and add context to squatting, gait, running, cutting, hip strength and mobility programming.

## How to Record This in Measurz

In Measurz, record baseline supine hip internal rotation ROM in degrees using the inclinometer or chosen device. Note active or passive method, side tested, pain score, symptom location, hip flexion angle, test position, device used and pelvic compensation.

Compare both sides and track progress across sessions. Add related hip external rotation, prone hip rotation, squat, gait, running or strength findings.

## Related Tests or Internal Linking Suggestions

Supine Hip External Rotation Test  
Prone Hip Internal Rotation Test  
Prone Hip External Rotation Test  
FADIR Test  
Hip Flexion Test  
Hip Extension Test  
Squat Assessment  
Running Assessment

## FAQs

### What is normal supine hip internal rotation ROM?

Common references often describe around 35–45 degrees, but values vary by method, age, anatomy, symptoms and position.

### How do you measure supine hip internal rotation?

Position the client supine, flex the hip and knee to a standard angle, rotate the hip inward and measure the angle.

### Should it be measured actively or passively?

Both can be useful, but active and passive values should be recorded separately.

### Why does pelvic control matter?

Pelvic rotation can make hip internal rotation appear greater than it really is.

### How should it be tracked?

Use the same hip angle, device, pelvis control and endpoint each session.

## Key Takeaways

Supine hip internal rotation measures inward hip rotation.  
Hip and pelvic position must be standardised.  
Active and passive values should be labelled separately.  
Side-to-side comparison is often practical.  
Measurz should capture degrees, side, pain, method and compensation.

## References

Charlton, P. C., et al. (2020). Reliability of hip range of motion measurement among experienced hip preservation surgeons. _Journal of Hip Preservation Surgery, 7_(1), 77–84.

Clarkson, H. M. (2020). _Musculoskeletal assessment: Joint range of motion, muscle testing, and function_ (4th ed.). Wolters Kluwer.

Ore, V., Nasic, S., & Riad, J. (2020). Lower extremity range of motion and alignment: A reliability and concurrent validity study of goniometric and three-dimensional motion analysis measurement. _Heliyon, 6_(8), e04713.