---
title: "Ankle Eversion Test"
description: "Ankle eversion ROM testing requires consistent setup, stabilisation, inclinometer placement, side comparison and cautious interpretation."
url: https://help.matassessment.com/en/articles/163-ankle-eversion-test
collection: "Range of Motion (AROM/PROM)"
updated: 2026-05-21
language: en
---

# Ankle Eversion Test

Ankle eversion ROM testing requires consistent setup, stabilisation, inclinometer placement, side comparison and cautious interpretation.

The Ankle Eversion Test measures how far the sole of the foot turns outward. It can be tested actively or passively using a goniometer, inclinometer or consistent ROM process. The result is useful for side-to-side comparison, movement monitoring and adding context to balance, gait, running and ankle strength assessments.

## Introduction

A client may show reduced ability to control the foot during balance tasks, cutting movements or landing. Another client may have a visible side-to-side difference in foot movement. Measuring ankle eversion ROM helps quantify that movement.

Eversion is influenced by subtalar and foot mechanics, so the result should be interpreted as a movement measure rather than a single-structure finding.

## Quick Summary

Test name: Ankle Eversion Test  
Purpose: Measure ankle/foot eversion range of motion  
Movement: Sole of the foot turns outward  
Joint/body region: Ankle, subtalar joint and foot  
Plane: Frontal plane with coupled foot motion  
ROM type: Active ROM, passive ROM or both  
Score: Degrees of eversion  
Equipment: Goniometer, inclinometer or Measurz ROM workflow  
Best used with: Ankle inversion, balance, gait, running, hopping and ankle strength tests  
Key limitation: Eversion ROM values vary strongly by measurement method and stabilisation

## What Is the Ankle Eversion Test?

The Ankle Eversion Test measures outward turning movement of the foot. In practical assessment, this movement may involve the subtalar joint, midfoot and forefoot.

## Why It Is Used

The test is used to establish baseline movement, compare sides and monitor change in foot and ankle motion.

It may help inform:

Balance programming  
Foot control assessment  
Ankle strengthening  
Gait and running monitoring  
Side-to-side comparison  
Progress tracking across sessions

## What It Measures

The test measures eversion ROM in degrees.

It may be influenced by:

Subtalar motion  
Midfoot mobility  
Foot posture  
Pain or stiffness  
Strength and control  
Lower-leg stabilisation  
Device placement  
Warm-up and fatigue  
Measurement method

The result does not explain the cause of movement difference by itself.

## Active vs Passive Range of Motion

Active eversion measures how far the client can turn the sole outward using their own control.

Passive eversion measures available movement when guided by the professional.

Both can be useful, but they should be recorded separately.

## Who It Is Useful For

This test may be useful for runners, field sport athletes, court sport athletes, balance clients, gym clients, dancers and anyone where foot or ankle movement tracking is relevant.

## Equipment Required

Goniometer or inclinometer  
Treatment table or chair  
Pain scale  
Measurz for recording ROM  
Optional towel roll  
Optional comparison side notes

## Step-by-Step Protocol or How to Apply This in Practice

### Starting position

Position the client sitting or lying with the foot free to move.

### Client position

Keep the knee relaxed. Record whether the knee is flexed or extended.

### Professional position

Sit or stand near the foot and lower leg.

### Body/joint setup

Start with the foot near neutral.

### Stabilisation

Stabilise the lower leg to reduce tibial rotation.

### Movement instruction

For active ROM, ask the client to turn the sole of the foot outward.

For passive ROM, gently guide the foot into eversion until the first firm endpoint, symptom limit or agreed end range.

### Measurement landmarks

Goniometer landmarks vary. Use a consistent reference to the tibia and foot and record your chosen method.

### Inclinometer or device placement

Place the inclinometer consistently on the foot according to your protocol. Record placement.

### What to ask

Ask about pain, stretch, stiffness, symptom location and whether symptoms are familiar.

### Stopping rules

Stop if pain increases, the client guards, lower-leg rotation dominates or measurement becomes inconsistent.

### What to record

Record active/passive ROM, side, degrees, device, pain score, symptom location, position and compensation.

### Number of trials

Use one to three trials and record whether you use best, average or selected trial.

### Retest consistency

Use the same setup, device, landmarks and endpoint each time.

## Scoring and Interpretation

The score is recorded in degrees.

A higher eversion value means more outward foot movement under the tested setup. A lower value means less eversion movement compared with the other side or previous baseline.

Interpretation is stronger when combined with inversion ROM, strength, balance, gait, hopping, running and symptom findings.

The result does not explain the cause of movement difference on its own.

## Normative Data, Benchmarks or Reference Values

Evidence level: **Level 3 — limited exact protocol-matched norms; use practical comparison guidance.**

Common teaching references often describe ankle/foot eversion around **15–20 degrees**, but values vary depending on whether the method captures subtalar-only motion or combined foot motion.

Practical benchmarks:

Compare left and right  
Track baseline to retest  
Compare active and passive values  
Record pain and symptoms  
Track compensation  
Interpret with inversion, balance and strength findings

## Reliability and Validity

Ankle eversion measurement reliability depends on stabilisation, landmarks and device placement. Lower-limb ROM reliability literature shows that goniometry and smartphone methods can be reliable, but protocol consistency is critical.

Because eversion is a small-range movement, small degree changes may reflect measurement variation rather than meaningful movement change unless repeated and supported by related findings.

## Common Errors and Testing Limitations

Common errors include allowing tibial rotation, measuring combined foot collapse rather than controlled eversion, inconsistent landmarks, poor stabilisation, forcing passive end range, not recording symptoms and comparing values from different methods.

Limitations include small movement range, multi-joint contribution, foot posture variation and measurement error.

## Practical Applications

Use ankle eversion ROM to track foot and ankle movement, compare sides, monitor change and inform balance, gait, strength and sport movement programming.

## How to Record This in Measurz

In Measurz, record baseline eversion ROM in degrees using the inclinometer or chosen device. Record active or passive method, side tested, pain score, symptom location, movement direction, test position, device used and compensation notes.

Compare both sides and track progress across sessions. Add related ankle strength, balance, gait, hop or functional findings.

## Related Tests or Internal Linking Suggestions

Ankle Inversion Test  
Ankle Dorsiflexion Test  
Ankle Plantarflexion Test  
Single-Leg Balance Test  
Y-Balance Test  
Ankle Strength Testing  
Hop Tests

## FAQs

### What is normal ankle eversion ROM?

Common reference values are often around 15–20 degrees, but values vary by protocol, device, foot structure and measurement method.

### How do you measure ankle eversion?

Measure outward turning of the foot using a goniometer or inclinometer while stabilising the lower leg.

### Should eversion be measured actively or passively?

Both can be useful. Active testing shows controlled movement, while passive testing shows available movement.

### What does reduced eversion mean?

It means less outward foot movement under the tested setup. It does not explain the cause by itself.

### How should eversion be tracked?

Use the same position, device, landmarks, endpoint and active/passive method each session.

## Key Takeaways

Ankle eversion measures outward foot movement.  
The movement includes subtalar and foot contribution.  
Small changes should be interpreted cautiously.  
Side-to-side comparison is often more useful than broad norms.  
Measurz should capture degrees, side, pain, device and compensation.

## References

Clarkson, H. M. (2020). _Musculoskeletal assessment: Joint range of motion, muscle testing, and function_ (4th ed.). Wolters Kluwer.

Milanese, S., et al. (2025). Reliability of range of motion measurements obtained by goniometry, photogrammetry and smartphone applications in lower limb joints: A systematic review. _Musculoskeletal Science and Practice_. Needs verification.

Norkin, C. C., & White, D. J. (2016). _Measurement of joint motion: A guide to goniometry_ (5th ed.). F. A. Davis.