--- title: "Ankle Plantarflexion Test" description: "Ankle plantarflexion ROM testing requires clear positioning, device placement, active/passive ROM recording, side comparison and cautious interpretation." url: https://help.matassessment.com/en/articles/160-ankle-plantarflexion-test collection: "Range of Motion (AROM/PROM)" updated: 2026-05-21 language: en --- # Ankle Plantarflexion Test Ankle plantarflexion ROM testing requires clear positioning, device placement, active/passive ROM recording, side comparison and cautious interpretation. The Ankle Plantarflexion Test measures how far the foot points downward at the ankle. It can be assessed actively or passively using a goniometer, inclinometer or consistent Measurz ROM process. The result helps compare movement between sides, monitor change over time and add context to calf, ankle, foot, running, jumping or squatting assessments. ## Introduction A client may report difficulty pushing off when running, reduced ankle movement during calf raises or stiffness when pointing the foot. Another client may show a side-to-side difference after a period of reduced loading, pain or training interruption. The Ankle Plantarflexion Test gives a simple way to quantify this movement in degrees. It does not explain the cause of reduced movement on its own, but it provides useful baseline information when interpreted alongside pain, symptoms, strength, calf capacity, ankle dorsiflexion, foot control and function. ## Quick Summary Test name: Ankle Plantarflexion Test Purpose: Measure ankle plantarflexion range of motion Movement: Pointing the foot downward Joint/body region: Ankle and foot Plane: Sagittal plane ROM type: Active ROM, passive ROM or both Score: Degrees of plantarflexion Equipment: Goniometer, inclinometer or Measurz ROM recording workflow Best used with: Ankle dorsiflexion, calf raise strength, calf raise endurance, gait, running, hopping and balance tests Key limitation: Plantarflexion ROM values vary by protocol, device, age, sport, symptoms and measurement method ## What Is the Ankle Plantarflexion Test? The Ankle Plantarflexion Test measures the range available when the foot moves downward away from the shin. This movement is commonly used during push-off in walking, running, jumping, calf raises and many sport-specific positions. The test can be performed actively, where the client moves the ankle themselves, or passively, where the professional moves the ankle while the client relaxes. ## Why It Is Used The test is used to establish a baseline, compare sides and monitor change in ankle movement over time. It may help inform: Calf raise programming Running and jumping assessment Foot and ankle mobility monitoring Side-to-side comparison Progress tracking after a change in symptoms or loading Exercise selection for ankle and calf programmes ## What It Measures The test measures the angle of ankle plantarflexion in degrees. It may be influenced by: Talocrural and foot movement Calf and anterior ankle tissue tolerance Pain or symptoms Strength and motor control Warm-up Foot position Measurement device Professional technique Previous activity or loading history Reduced plantarflexion ROM provides movement information, but it does not explain the cause on its own. ## Active vs Passive Range of Motion Active plantarflexion measures how far the client can point the foot using their own muscle control. Passive plantarflexion measures how far the ankle can move when guided by the professional. Comparing active and passive ROM can help separate movement capacity from control, strength, pain inhibition or confidence. Passive ROM should be applied gently and should not force symptoms. ## Who It Is Useful For This test may be useful for runners, jump-sport athletes, field sport athletes, dancers, gym clients, older adults and clients monitoring foot or ankle movement. It is also useful when comparing ankle movement across sessions or between left and right sides. ## Equipment Required Goniometer or inclinometer Treatment table or chair Pain scale Measurz for recording ROM, side, pain and progress Optional towel roll Optional comparison side notes ## Step-by-Step Protocol or How to Apply This in Practice ### Starting position Position the client sitting or lying with the ankle free to move. Use the same position for every retest. ### Client position The knee may be extended or flexed depending on the protocol. Record the knee position because gastrocnemius tension may influence ankle movement. ### Professional position Stand or sit beside the foot so the ankle, heel and lower leg can be observed. ### Body/joint setup Start with the ankle near neutral where practical. ### Stabilisation Stabilise the lower leg and avoid allowing the whole leg to rotate. ### Movement instruction For active ROM, ask the client to point the foot downward as far as comfortably possible. For passive ROM, move the foot into plantarflexion gently until the first firm endpoint, symptom limit or agreed end range. ### Measurement landmarks For goniometry, commonly align the stationary arm with the fibula, the axis near the lateral malleolus and the moving arm with the lateral border of the foot or fifth metatarsal. Use the same landmarks each time. ### Inclinometer or device placement If using an inclinometer, place it consistently on the dorsal or lateral aspect of the foot according to your chosen method. Record placement. ### What to ask Ask about pain, stretch, stiffness, pinching, symptom location and whether the movement feels familiar. ### Stopping rules Stop if pain increases sharply, symptoms spread, the client guards strongly or movement is not tolerated. ### What to record Record active or passive ROM, side, degrees, knee position, device used, pain score, symptom location and compensation. ### Number of trials One to three trials may be used. Record the best, average or selected trial consistently. ### Retest consistency Use the same position, device, landmarks, warm-up and endpoint definition each time. ## Scoring and Interpretation The score is recorded in degrees. A higher plantarflexion value means more downward ankle motion under the tested setup. A lower value means less plantarflexion ROM compared with the other side, previous baseline or selected reference value. Interpretation is stronger when combined with: Pain score Symptom location Active versus passive comparison Left versus right comparison Calf strength Calf endurance Ankle dorsiflexion Gait or running findings Jumping or hopping performance The result does not explain the cause of reduced movement by itself. It helps guide exercise selection, monitoring and further assessment decisions. ## Normative Data, Benchmarks or Reference Values Evidence level: **Level 3 — limited exact norms for this specific protocol; use practical comparison guidance.** Commonly used teaching references often describe ankle plantarflexion around **45–50 degrees**, but values vary by protocol, position and measurement method. These should be treated as broad reference values rather than universal targets. Practical benchmarks: Compare left and right sides Compare active and passive ROM Compare baseline to retest Track pain at end range Track movement quality and compensation Use related calf strength and functional findings ## Reliability and Validity ROM reliability improves when the same measurement position, landmarks, device and endpoint are used. A 2025 systematic review on lower-limb ROM measurement reliability reported that reliability varies by joint, device, examiner and method, supporting consistent protocols rather than casual visual estimates. A 2025 teleconference-based goniometry study reported strong agreement for ankle dorsiflexion and plantarflexion when comparing in-person and remote or photo-based measurements, but still showed that method and setup can influence values. Small changes should be interpreted cautiously unless they exceed expected measurement variation and align with symptoms, function or repeated testing. ## Common Errors and Testing Limitations Common errors include changing knee position, poor landmarking, measuring foot motion rather than ankle motion, forcing passive end range, not recording pain, allowing leg rotation, comparing active and passive values without labelling them, and comparing results from different devices. Limitations include measurement variation, foot structure differences, warm-up effects, symptoms, strength, client effort and different definitions of end range. ## Practical Applications Use ankle plantarflexion ROM to establish baseline movement, compare sides, guide calf and ankle programming, monitor symptoms, support return-to-training decisions and decide whether related tests would add context. It is most useful with ankle dorsiflexion, calf raise strength, calf raise endurance, balance, gait, running, hopping and jumping assessments. ## How to Record This in Measurz In Measurz, record the baseline ROM in degrees using the inclinometer or chosen device. Note whether the result is active or passive, record side tested, pain score, symptom location, test position, knee position, device used and compensation notes. Track progress across sessions and compare both sides. Add related strength findings, calf endurance results, functional findings and retest date. ## Related Tests or Internal Linking Suggestions Ankle Dorsiflexion Test Weight-Bearing Lunge Test Single-Leg Calf Raise Test Calf Raise Endurance Test Ankle Inversion Test Ankle Eversion Test Hop Tests Balance Tests ## FAQs ### What is normal ankle plantarflexion ROM? Common reference values are around 45–50 degrees, but ROM varies by person, protocol, device, sport, symptoms and measurement method. ### How do you measure ankle plantarflexion ROM? Measure the angle while the client points the foot downward, using a goniometer or inclinometer with consistent landmarks and position. ### Should plantarflexion be measured actively or passively? Both can be useful. Active ROM shows what the client can control, while passive ROM shows available movement when guided. ### What does reduced plantarflexion ROM mean? It means less movement under the tested setup. It does not explain the cause by itself. ### How should plantarflexion ROM be tracked over time? Use the same position, device, landmarks, side, endpoint and recording method across sessions. ## Key Takeaways Ankle plantarflexion ROM measures how far the foot points downward. Active and passive ROM should be labelled separately. Broad reference values are useful, but side-to-side and baseline comparison are often more practical. Standardisation matters more than visual estimation. Measurz should capture degrees, pain, side, device, position and progress. ## References Clarkson, H. M. (2020). _Musculoskeletal assessment: Joint range of motion, muscle testing, and function_ (4th ed.). Wolters Kluwer. Milanese, S., et al. (2025). Reliability of range of motion measurements obtained by goniometry, photogrammetry and smartphone applications in lower limb joints: A systematic review. _Musculoskeletal Science and Practice_. Needs verification. Norkin, C. C., & White, D. J. (2016). _Measurement of joint motion: A guide to goniometry_ (5th ed.). F. A. Davis.